COBRA P
MODULAR DESIGN
HIGH QUALITY
CONFORTABLE WORK
COBRA P is a range of micro-blasters with precise pencil nozzles. Suitable for grain sizes catering for a wide spectrum of blasting needs. Four modules and three sizes of nozzles provide full spectrum of sandblasting with corundum sand as well as glass beads of any particle size.
TECHNOLOGY
NO FAILURES
Sandblasters control system are equipped with pneumatic elements. No components that are sensitive to dust such as electric valves guarantee a reliable and long-term operation.
SMART ASPIRATION SYSTEM
Circulation system inside the chamber reduces sand loss up to 50%.
FUTURE INVESTMENTS
Module structure of Cobra sandblaster allows to extend every unit in any time to precise or multifunctional version. Extension is very simple and customer can do it whiteout sending unit to service.
DURABILITY MEANS SAVINGS
The COBRA P pencil nozzles of sandblasters are made of sinter up to 4 x higher resistance to abrasion. A wide selection of nozzles with different diameters – 0.7 mm, 1.0 mm, 1.2 mm, allows to adjust the gradation of used sand.
Modern technology of nozzles production significantly affects the rate of blasting. A replacement of nozzles is extremely easy due to a modern system.
PRECISION IS QUALITY
While precise sandblasting, it is important that the flow of sand is so even to ensure perfect surface preparation and not to damage delicate structure. COBRA P sandblasters are equipped with an innovative excitation and collection system of sand.
As a result, the stream of sand is unified, there is no effect of “pulsing” and the force of hitting electro corundum grains to a sandblasted element is always the same.
SAFETY
SAFE CONTAINERS
The massive containers of transparent plastic facilitate control of a sand level. Polycarbonate material provides resistance to high pressure and durability of construction.
PRESSURE CONTROL
A water and oil filter with a reductor precisely adjusts the pressure and does not allow moisture and dirt get into a container.
MAGNETIC LOCK
Magnet lock which effectively closes chamber doors and guarantees tight working conditions of your sandblaster
COBRA PROTECTS YOUR LUNGS
The dust generated during sandblasting contains harmful remains of corundum and cristobalite. These substances are recognized as carcino
genic and posing a serious threat to human health. Therefore, the most important element of prosthetic sandblasters should be an effective chamber sealing. Unfortunately only few sandblasters meet this requirement.
For COBRA sandblasters a special so called lip seal ring has been implemented. It is very close to the casing circumference at the surface of approximately 1 cm what effectively reduces releasing of harmful dust of the unit.
COBRA PROTECTS YOUR HANDS
The sharp shape of alumina sand grains and hitting pressure towards cleaned material pose a risk to the user’s hand while holding a sandblasted detail. Most pencil nozzles sandblasters and stationary ones have the cuffs only and the user’s hands are exposed to a stream of sand.
All COBRA sandblasters without exception are equipped with gloves resistant to strong jet of sand that fully protect hands of a dental technician
HANDLING
INTEGRATED OPTION SWITCH
Machine operation is facilitated by a rotating mode selector placed inside the chamber. Multi-coloured switch signs are compatible with the colour of a pencil cover and a container marking.
HAND FREE NAVIGATION
Navigating of the sand flow is without the necessity of the hands giving what guarantees a 100% pneumatic foot switch.
LED LIGHTING
The light source comes from special LED diodes that features a high brightness over 5000 Lux and accurately illuminates the work.
In addition, it is placed in a dust-tight enclosure separating from sand, increasing its durability and work safety.
WHY COBRA P ?
it effectively prevents from dust
gloves instead of cuffs protect your hands
sintered boron nozzles as a standard
precise sand stream
madular design
TECHNICAL DATA
cobra p
DIMENSIONS
(a) 350; (b)470; (c) 410
PRESSURE
2 -4 bar
NOZZLES
1
NOZZLES SIZE
0,7 / 1,00 / 1,2 mm
AC/DC
230 V/ 50 HZ
WEIGHT
8 kg
cobra 2P
DIMENSIONS
(a) 350; (b)470; (c) 410
PRESSURE
2 -4 bar
NOZZLES
2
NOZZLES SIZE
0,7 / 1,00 / 1,2 mm
AC/DC
230 V/ 50 HZ
WEIGHT
8 kg
cobra 3P
DIMENSIONS
(a) 350; (b)470; (c) 410
PRESSURE
2 -4 bar
NOZZLES
3
NOZZLES SIZE
0,7 / 1,00 / 1,2 mm
AC/DC
230 V/ 50 HZ
WEIGHT
10 kg
cobra 4P
DIMENSIONS
(a) 350; (b)470; (c) 410
PRESSURE
2 -4 bar
NOZZLES
4
NOZZLES SIZE
0,7 / 1,00 / 1,2 mm
AC/DC
230 V/ 50 HZ
WEIGHT
8 kg
SEE ALSO
CATALOGUE
WARRANTY
SERVICE
ASSISTANCE
DEVICES
Injector Mouldings:
Multipress Eco
Multipress Pro
Multipress Max
Ceramic Furnaces:
Casting Machines:
Sandblasters:
Sintering Furnaces:
Burnout Furnaces:
Vacuum Mixers:
Trimmers:
Dust Extractors:
Laser Drill:
MULTIPRESS
Injector Mouldings:
Materials:
Tools:
Accesories: